- 1 Installation
- 2 Commands
- 2.1 bossbomb
- 2.2 breed
- 2.3 breeding
- 2.4 compedit
- 2.5 compsearch
- 2.6 compsee
- 2.7 comptake
- 2.8 comptest
- 2.9 dexcheck
- 2.10 eggsteps
- 2.11 evs
- 2.12 hatch
- 2.13 hiddenpower
- 2.14 ivs
- 2.15 levelling
- 2.16 movelist
- 2.17 pc
- 2.18 pixelextrasreload
- 2.19 pokeclone
- 2.20 pokedel
- 2.21 pokeedit
- 2.22 pokeevolve
- 2.23 pokefaint
- 2.24 pokegivetype
- 2.25 pokekill
- 2.26 pokenpckill
- 2.27 pokerandom
- 2.28 pokereset
- 2.29 pokerestart
- 2.30 pokeretrieve
- 2.31 pokesee
- 2.32 pokesell
- 2.33 pokespawncoords
- 2.34 poketake
- 2.35 poketest
- 2.36 randomleg
- 2.37 redeemfossil
- 2.38 starter
- 2.39 tms
- 2.40 tradesim
- 2.41 wiki
- 2.42 xpmod
- 2.43 Permissions
- 3 Config settings
|Minecraft version||Pixelmon version||Pixelmon Extras version|
On servers, Pixelmon Extras is server-side and does not need to be installed by each individual player to be used.
- Download Pixelmon Extras for your version of Minecraft here.
- Place the downloaded jar file in the mods folder.
Note: Command syntax is displayed in the standard Minecraft command format. An explanation of this format can be found here.
/bossbomb <boss type>: Turns all wild Pokémon into a boss of the given type.
/breed <position> <position>: Spawns an Egg in the player's party (or PC if the player's party is full) that would normally be created when breeding the two Pokémon in the specified party slots. If two selected Pokémon cannot breed together, no Egg will be produced. This command is not affected by breeding environments. After using this command, a 10 minute cool-down timer (modifiable in the config) must elapse before using this command again.
/breeding [true|false]: Sets whether a notification will be sent to the player when /breed's cool-down timer has elapsed. Not supplying a true/false argument will cause the setting to be toggled between true and false.
/compedit <player> <box> <slot> <Pokémon Spec>: Edits the specified Pokémon in the specified player's PC using a Pokémon Spec.
/compsearch <player> <Pokémon>: Displays all occurrences of the specified Pokémon in the specified player's PC, including box number, Shininess, level, Nature, Growth, Ability, original Trainer, held item, EVs, IVs, and moves. To find the majority of this information, the player can mouse-over the corresponding section of the chat box. Eggs containing the specified Pokémon will also be displayed. This command does not look in the player's party.
/compsee <player> <box>: Shows all of the Pokémon in the specified box in the specified player's PC. Along with the Pokémon themselves, their Shininess, level, Nature, Growth, Ability, original Trainer, held item are shown. To find the majority of this information, the player can mouse-over the individual Pokémon of the chat box. The contents of Eggs are shown rather than the Eggs themselves.
/comptake <player> <box> <slot>: Takes the Pokémon in the specified box number and slot and gives it to the user of the command.
/comptest <player> <box> <position> <Pokémon Spec>: Checks whether the Pokémon in the specified position of the specified player's PC matches the Pokémon Spec given in the command. For example,
/comptest Hiroku 1 23 untradeable unbreedable s will check if the specified Pokémon is untradeable, unbreedable, and shiny.
/dexcheck: Gets the number of caught Pokémon according to the user's Pokédex.
/eggsteps [player] <slot>: Displays the total number of steps required to hatch the Egg in the specified party slot (1-6) of the specified player's party. If no player is given, the command user's party will be used.
/evs <player> <slot>: This command will display the EVs that the Pokémon in the specified party slot (1-6) of the specified player has accumulated. It will show the EVs for each individual stat (HP, Attack, Defense, Special Attack, Special Defense, Speed), the total amount of EVs gained, the maximum possible EVs (510), and the percentage of EVs that have been gained towards the maximum (Current EVs).
/hatch [player] <position>: Hatches the Egg that currently resides in the specified position of the player's party. This command has no effect if the position does not contain an Egg. After using this command, a 10 minute cooldown timer (modifiable in the config) must elapse before using this command again.
/hiddenpower <position>: Displays the type and base power of Hidden Power if used by the Pokémon in the specified party position (1-6) of the command user's party. This command will function regardless of whether the targeted Pokémon currently knows Hidden Power.
/ivs <player> <position>: Displays the IVs that the Pokémon in the specified party position (1-6) of the specified player has. The command will show the IVs for each stat (HP, Attack, Defense, Special Attack, Special Defense, Speed), the total IVs, the maximum possible IVs (31 in every stat, 186), and the percentage of IVs that the Pokémon has compared to the maximum (Current IVs).
/levelling [player] [slot] [on|off] : Enables/disables leveling for the user's (or the given player's) entire party (or the Pokémon in the specified slot).
/pc: Opens the player's PC.
/pixelextrasreload: Reloads the Pixelmon Extras config.
/pokeclone <slot> [player]: Creates a perfect clone of the Pokémon in the specified slot of the user's (or the given player's) party
/pokedel <player> <pc|party> <slot|specifications... [confirm]>: Removes Pokémon from the party or PC of the given player. A specific slot (or box and box position in the case of PC deletion) can be used to specify which Pokémon. Alternatively, instead of party/PC location, Pokémon spec arguments can be used to delete more than one Pokémon. For example,
/pokedel <player> pc lvl:100 would delete all Pokémon that are level 100 from the specified player's PC.
/pokeedit <player> <position> <Pokémon spec>: Edits one or more aspects of the Pokémon in the specified position of the specified player's party. This command supports all components of Pokémon Specs.
/pokeevolve (/pevolve, /evolve) [player] <position>: Evolves the Pokémon in the specified position of the specified player's party if there is a Pokémon it can evolve into. The Pokémon will evolve regardless of whether evolutionary conditions (such as level) are met. If the Pokémon can evolve into multiple different Pokémon, like Eevee, the Pokémon will evolve into its first evolution by Pokédex number (in Eevee's case, Vaporeon). The player argument can be omitted to refer to the player who used the command.
/pokefaint <player>: Faints Pokémon in the party of the given player. If
all is provided as the player then all online player party Pokémon will be fainted.
/pokegivetype <player> <type> [Pokémon Spec]: Gives a random Pokémon of the given type to the specified player with optional Pokémon Spec arguments.
/pokekill: Removes all wild Pokémon from the world except those that are in battle (either with players or other wild Pokémon). Pokémon owned by players are unaffected. Pokémon spawned with Pixelmon spawners are affected.
/pokenpckill <type>: Removes all NPCs of the specified type. The
type argument can be any of the following:
all: All NPCs.
chatting: Chatting NPCs.
relearner: Move relearners.
trainer: NPC Trainers.
tutor: Move tutors.
/pokerandom [player] [specifications...]: Gives a random Pokémon to the specified player with optional Pokémon spec arguments.
/pokereset <player> <slot> [level]: Sets the Pokémon in the specified party position of the specified player to level 5 and all of its EVs to 0.
/pokerestart [player]: Deletes all of the specified player's Pokémon, and kicks the player from the server.
/pokeretrieve [player]: Returns all of the specified player's party Pokémon to their Poké Balls. The player argument can be omitted to use the command on the command's user.
/pokeretrieve all: Uses
/pokeretrieve on all players on the server.
/pokesee <player>: Shows the contents of the specified player's party, including Pokémon species, Shininess, level, Nature, Growth, Ability, original Trainer, held item, EVs, IVs, and moves. To find the majority of this information, the player can mouse-over the corresponding section of the chat box. Eggs containing the specified Pokémon will also be displayed.
/pokesell <player> <position> [-f]: Gives the specified player the Pokémon in the specified position of the command user's party. This command cannot be used if the user of the command only has one Pokémon or the Pokémon is untradeable, unless they add
-f to the command and have the
pixelextras.admin.bypass permission node. Despite the name of the command, this command only gives Pokémon to other players for free; nothing can be requested in exchange for the Pokémon.
/pokespawncoords <Pokémon> <player>: Spawns the specified Pokémon at the specified player's coordinates.
/pokespawncoords <Pokémon> <x> <y> <z> [specifications...]: Spawns the specified Pokémon at the specified x, y, and z coordinates, with optional Pokémon spec arguments.
/poketake <player> <position>: Takes a Pokémon in the specified party position in specified player and gives it to the user of the command.
/poketest <player> <position> <Pokémon Spec>: Checks whether the Pokémon in the specified position of the specified player's party matches the Pokémon Spec given in the command. For example,
/poketest Hiroku 1 untradeable unbreedable s will check if the specified Pokémon is untradeable, unbreedable, and shiny.
/randomleg <player> [specifications...]: Gives a random legendary Pokémon to the specified player with optional Pokémon spec arguments.
/redeemfossil [all]: Revives the currently held Fossil item (covered or cleaned) and adds it to the player's party (or PC if the party is full). If
all is added to the command, the entire stack will be consumed and redeemed.
/starter [player]: Causes the starter Pokémon selection screen to open for the specified player. This will only happen if the specified player has not already chosen a starter Pokémon. If no player name is specified, the command will be used on the command's user.
/tms <Pokémon>: Displays a list of what TMs the specified Pokémon is compatible with.
/tradesim <position> [trade partner]: This command triggers a trade evolution on the Pokémon in the specified position of the player's party. If the Pokémon also needs to have a held item to evolve, this requirement will be in effect while simulating the trade. The
trade partner argument is used for Pokémon that only evolve when traded with a certain other Pokémon. For example to evolve Shelmet into Accelgor, use
/tradesim <position> Karrablast.
If the Pokémon does not evolve by trading it, this command does nothing.
/wiki <Pokémon> <info>: Displays server-specific information about a certain Pokémon. The
info argument can be one of the following keywords to display different types of information about the Pokémon.
biome: Lists all the biomes the specified Pokémon will spawn in.
catch: Displays the Pokémon's catch rate.
egggroup: Lists the Egg Group(s) of the specified Pokémon.
evo: Lists the name of the Pokémon's next evolution (if any) and the requirements for evolving into it.
genderratio: Displays the percent chance that a Pokémon is male or if it is genderless.
moves: Displays the Pokémon's move learnset by level up.
rarity: Displays the rarity of the specified Pokémon spawning, if it doesn't spawn, or is set to be Legendary.
time: Displays which times the specified Pokémon will spawn.
/xpmod <multiplier>: Changes the multiplier for Pokémon experience gain in battle. This multiplier will be reset if the server is reset.
/hatchto be used on other players:
pixelextras.command.admin.pokerestartfor use on other players)
/pokesellto give away their last Pokémon and untradeable Pokémon:
- "Allow /breed cooldown notifications": Enables the use of
/breedingto be notified when /breed can be used again.
- "Allows Legendaries via /pokerandom": Enables Legendary Pokémon to be given via
- "Breed Command Cooldown": The number of seconds that a player must wait between uses of
- "Hatch Command Cooldown": The number of seconds that a player must wait between uses of
- "Notify Ops": Enables most commands to notify ops (and print to the FML log) when a player uses them.
Along with the "pixelextras.cfg" file containing the above settings, a "cooldown.cfg" is generated to store individual cooldowns for each player who uses the
/hatch commands. This cooldown.cfg file should not be manually modified; doing so may cause unexpected side effects.